Author Topic: Start of Challenge 101  (Read 7146 times)

Bill Gruby

Start of Challenge 101
« on: September 01, 2019, 06:37:37 AM »
 It begins now . You have 60 days to design and post what you intend to build for this challenge. You must post your name and what the project is in this post only. Just your name and project name, that's  all. Any discussion is to be done in the Challenge 101 thread. You have until Oct. 30th.  Remember this is the design phase, but you may  start building once the project is posted. Have fun fellas.

 "Billy G"
I'm pretty sure that my last words will be, OH SHIT,THAT DIDN'T WORK.

Bill Gruby

Re: Start of Challenge 101
« Reply #1 on: September 01, 2019, 08:07:27 AM »
 Bill Gruby ---- Single Cylinder 4 stroke I. C. Engine ____ Plans by Dale Detrich.  This is a non entry build.
I'm pretty sure that my last words will be, OH SHIT,THAT DIDN'T WORK.

Carpenter84

Re: Start of Challenge 101
« Reply #2 on: September 02, 2019, 07:11:14 AM »

Shawn Huk - brass socket hammer for the mill draw bar.

« Last Edit: September 02, 2019, 07:17:55 AM by Bill Gruby »
Shawn

Bill Gruby

Re: Start of Challenge 101
« Reply #3 on: September 29, 2019, 07:22:21 AM »
 Monday is Sept. 30, that's the half way point in the design stage. I will give this book away to Shawn if he is the only entrent in this contest as long as he shows me his completed project. You have 31 more days to enter, don't wait too long.

 Remember, your name and the project name must appear in this thread. No others will count. Good luck to all.

  "Billy G"
I'm pretty sure that my last words will be, OH SHIT,THAT DIDN'T WORK.

jpigg55

Re: Start of Challenge 101
« Reply #4 on: September 29, 2019, 07:42:20 AM »
Late start, but I'll jump in.
Jimmy Pigg - Corn stover pellet press
I'm designing and building the entire thing, but the drive is a salvaged right angle PTO drive I'm modifying. The die design is my own.
Might need a judges ruling on if this qualifies.
Logan 6560H, SB 9A, Clausing 8520, Sanford MG 612

Bill Gruby

Re: Start of Challenge 101
« Reply #5 on: September 29, 2019, 07:57:16 AM »
 Sure hope you read the whole thread, it MUST incorporate a 3/4 brass plumbing "T" and that must be recognizable at project end. Very  ambicious project you have there my friend. I look forward to seeing the end result.

 "Billy G"
I'm pretty sure that my last words will be, OH SHIT,THAT DIDN'T WORK.

woodchucker

Re: Start of Challenge 101
« Reply #6 on: September 29, 2019, 08:37:22 AM »
Ok, I'll play.


I need a larger brass hammer.
I may do a deadblow , or may rely on the weight we'll see.


Hoping to come up with another item. And still hoping my vision improves.
Jeff
Clausing 8520   SB Model 9a - power hacksaw, Milwaukee band saw in a table.  Delta Rockwell Surface Grinder
For pics: https://imgur.com/user/woodchucker/posts

Remember measure once cut twice, or was the measure twice cut once...

Terrywerm

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1384
  • Total likes: 1089
  • It's only down the road a little piece - Jordan MN
Re: Start of Challenge 101
« Reply #7 on: September 29, 2019, 08:47:48 AM »
I would love to join in, but I can see already that I will not have enough time for such a project. Way too busy at work, and stuff is breaking around here faster than I can fix it. I've got a project in mind, but there is no way I can get it done in time.
Terry

Making chips with old machines!

Bill Gruby

Re: Start of Challenge 101
« Reply #8 on: September 29, 2019, 12:00:39 PM »
 WOW, there are now 3 good entries.

 "Billy G"
I'm pretty sure that my last words will be, OH SHIT,THAT DIDN'T WORK.