Author Topic: ACDC  (Read 5269 times)

Bill Gruby

Re: ACDC
« Reply #90 on: September 03, 2020, 12:43:21 PM »
 Just for you Charles, my good friend from down under.

  https://www.youtube.com/watch?v=KrLTe1_9zso

 "Billy G"
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

savarin

Re: ACDC
« Reply #91 on: September 03, 2020, 07:46:41 PM »
Cheers Bill,There has been a petition to make this our national anthem.
In my opinion something way better than our current one.
Who uses "girt" these days.

Bill Gruby

Re: ACDC
« Reply #92 on: October 09, 2020, 08:37:10 PM »
 Another Icon has passed, Eddie VanHalen Passed away on October 6, 2020.Rest in Peace Eddie.

 "Billy G"
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

PJB

Re: ACDC
« Reply #93 on: October 11, 2020, 11:30:19 PM »
I got my pencil. Gimme something to write on
1991 Bridgeport Series I 2J-VS  9"x48"
1979 Clausing Colchester Bantam Mk2 11"x30"
1972 Harig Super 612
2015 Tormach PCNC-1100 Mill

"They wants what you gots!"

grumpygator

Re: ACDC
« Reply #94 on: November 18, 2020, 11:27:37 PM »
How about some Temptations from the '60s. Just ahead of their time.
     https://www.youtube.com/watch?v=OHhhLlchtZ8&ab_channel=kate4ever1 :7505:
       **G**

Carpenter84

Re: ACDC
« Reply #95 on: November 18, 2020, 11:46:56 PM »
Hocus pocus by focus. Probably one of my all time favorite songs ever...
Shawn

First 9x42 column mill, 9x42 Induma Knee mill,
Enterprise 10x28 lathe,
Ko Lee 6x12 surface grinder,
D. McKenzie 15" metal shaper,
Airco dip/stick 160 welder,

woodchucker

Re: ACDC
« Reply #96 on: November 19, 2020, 07:00:04 AM »
How about some Temptations from the '60s. Just ahead of their time.
     https://www.youtube.com/watch?v=OHhhLlchtZ8&ab_channel=kate4ever1 :7505:
       **G**



not ahead of their time, we are just repeating the same mistakes of history. we never seem to learn.

Jeff
Clausing 8520   SB Model 9a - power hacksaw, Milwaukee band saw in a table.  Delta Rockwell Surface Grinder
For pics: https://imgur.com/user/woodchucker/posts

Remember measure once cut twice, or was the measure twice cut once...

Bill Gruby

Re: ACDC
« Reply #97 on: November 19, 2020, 07:37:26 AM »
 You ask Shawn, we find for you.

 https://www.youtube.com/watch?v=RFDW9b_ejfI

 "Billy G"
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

Carpenter84

Re: ACDC
« Reply #98 on: November 19, 2020, 08:12:55 AM »
Interviewer: Thijs van Leer, what would you like to do when you grow up?

Thijs: I'd like to play flute and organ in a psychedelic progressive rock band..






Oh, and acid... Lots. Copious amounts, in fact.




That video never gets old. My dad had Focus on 8 track that we had set up in the living room when I was maybe 3 or 4 years old. He'd put that song on, we'd play it 5 or 6 times... Which is quite the feat being an 8 track and all... And dance around the living room like a pair of weirdos. Later in life I realise it was so fun for him because he was always full of vodka. Lol. Either way, classic rock never left me. Fairly certain the ribbon in that Focus cassette broke. He pulled all the tape out to show me how much was in it. Lol. The PILE on the floor.
Shawn

First 9x42 column mill, 9x42 Induma Knee mill,
Enterprise 10x28 lathe,
Ko Lee 6x12 surface grinder,
D. McKenzie 15" metal shaper,
Airco dip/stick 160 welder,

savarin

Re: ACDC
« Reply #99 on: November 29, 2020, 06:31:26 AM »
« Last Edit: January 09, 2021, 07:50:26 PM by savarin »

grumpygator

Re: ACDC
« Reply #100 on: January 08, 2021, 05:47:29 PM »
How 'bout some two wheel music.
    https://www.youtube.com/watch?v=5yw2yKNLEPc
           **G**

savarin

Re: ACDC
« Reply #101 on: January 09, 2021, 07:50:01 PM »
Not my style of music but that is indeed "A fine motorbike"And he sure can play guitar.

PJB

Re: ACDC
« Reply #102 on: February 16, 2021, 12:54:22 AM »
Somehow going down the YouTube rabbit hole watching tankers breaking in half at sea I end up on this.

Wow these kids go..

https://youtu.be/YXDTWPH8Dss
1991 Bridgeport Series I 2J-VS  9"x48"
1979 Clausing Colchester Bantam Mk2 11"x30"
1972 Harig Super 612
2015 Tormach PCNC-1100 Mill

"They wants what you gots!"

Carpenter84

Re: ACDC
« Reply #103 on: February 16, 2021, 05:47:58 AM »
That tanker video is really something, huh? Shame a few guys had to die...
Shawn

First 9x42 column mill, 9x42 Induma Knee mill,
Enterprise 10x28 lathe,
Ko Lee 6x12 surface grinder,
D. McKenzie 15" metal shaper,
Airco dip/stick 160 welder,

grumpygator

Re: ACDC
« Reply #104 on: March 20, 2021, 11:48:22 PM »
Just for grins.
  https://www.youtube.com/watch?v=Bj_lZ4hkJd8
        **G**