Author Topic: Emugies (sp)  (Read 113 times)

4GSR

Emugies (sp)
« on: May 18, 2019, 08:25:01 AM »
Rusty,

Is there any chance of getting better emugies (  :) ;) :D ;D >:( :( :o 8) :-\ :-* :'( ) to use.  The one's installed, I can't hardly see them.  Can you give us the same ones used over on the forums you have?  Some of us are in our senior years and have difficult time seeing, you know what I mean.

Thanks,

Ken

Carpenter84

Re: Emugies (sp)
« Reply #1 on: May 18, 2019, 10:46:08 AM »
Emoticons
Shawn

First 9x42 column mill,
Enterprise 10x28 lathe,
Ko Lee 6x12 surface grinder,
Airco dip/stick 160 welder,
Fully stocked wood shop.

4GSR

Re: Emugies (sp)
« Reply #2 on: May 18, 2019, 11:22:19 AM »
Thank you Shawn.  I'm not too savy with this stuff.  Learning as I go.
Ken

Carpenter84

Re: Emugies (sp)
« Reply #3 on: May 18, 2019, 01:08:33 PM »
Hey, I'm far past my technological prime too. I have no freaking clue about the newer computer junk.
Shawn

First 9x42 column mill,
Enterprise 10x28 lathe,
Ko Lee 6x12 surface grinder,
Airco dip/stick 160 welder,
Fully stocked wood shop.

Rusty

Re: Emugies (sp)
« Reply #4 on: May 18, 2019, 04:15:47 PM »
It may take me a bit but I'll try to get some better ones on here.

grumpygator

Re: Emugies (sp)
« Reply #5 on: May 18, 2019, 05:13:34 PM »
THANKS RUSTY  **G**[/size]