Author Topic: Emugies (sp)  (Read 214 times)

4GSR

Emugies (sp)
« on: May 18, 2019, 08:25:01 AM »
Rusty,

Is there any chance of getting better emugies (  :) ;) :D ;D >:( :( :o 8) :-\ :-* :'( ) to use.  The one's installed, I can't hardly see them.  Can you give us the same ones used over on the forums you have?  Some of us are in our senior years and have difficult time seeing, you know what I mean.

Thanks,

Ken

Carpenter84

Re: Emugies (sp)
« Reply #1 on: May 18, 2019, 10:46:08 AM »
Emoticons
Shawn

First 9x42 column mill,
Enterprise 10x28 lathe,
Ko Lee 6x12 surface grinder,
Airco dip/stick 160 welder,
Fully stocked wood shop.

4GSR

Re: Emugies (sp)
« Reply #2 on: May 18, 2019, 11:22:19 AM »
Thank you Shawn.  I'm not too savy with this stuff.  Learning as I go.
Ken

Carpenter84

Re: Emugies (sp)
« Reply #3 on: May 18, 2019, 01:08:33 PM »
Hey, I'm far past my technological prime too. I have no freaking clue about the newer computer junk.
Shawn

First 9x42 column mill,
Enterprise 10x28 lathe,
Ko Lee 6x12 surface grinder,
Airco dip/stick 160 welder,
Fully stocked wood shop.

Rusty

Re: Emugies (sp)
« Reply #4 on: May 18, 2019, 04:15:47 PM »
It may take me a bit but I'll try to get some better ones on here.

grumpygator

Re: Emugies (sp)
« Reply #5 on: May 18, 2019, 05:13:34 PM »
THANKS RUSTY  **G**[/size]

4GSR

Re: Emugies (sp)
« Reply #6 on: June 25, 2019, 05:13:31 PM »
Rusty,

Have you had any luck finding anything better? 

These really suck.  Why couldn't you use the one's that you have on your other forums?

Ken
Ken

Rusty

Re: Emugies (sp)
« Reply #7 on: June 26, 2019, 05:06:22 AM »
For some ungodly reason the pack that works so well on the other sites gives an epic fail on this site. Same software with the only difference being the database.

I'm going to try building a set for this site. It's a bit time consuming and I've been busy helping my 82 year old mother.

woodchucker

Re: Emugies (sp)
« Reply #8 on: June 26, 2019, 08:02:21 AM »
Rusty,
Thank you,  but not that important in the scheme of things.
Go take care of mon.
Jeff
Clausing 8520   SB Model 9a - power hacksaw, Milwaukee band saw in a table.  Delta Rockwell Surface Grinder (not online yet .. being rebuilt where am I going to stick this)
For pics: https://imgur.com/user/woodchucker/posts

4GSR

Re: Emugies (sp)
« Reply #9 on: June 26, 2019, 08:18:56 AM »
Yes, go take care of mom!  This can wait.

Thanks,

Ken
Ken

Bill Gruby

Re: Emugies (sp)
« Reply #10 on: June 26, 2019, 10:15:03 AM »
 You only get one MOM, get the hell outta here.

 "Billy G"
Don't sweat getting old, you'll still do dumb shit, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.