Author Topic: Vibration Dampers Noise control  (Read 230 times)

woodchucker

Vibration Dampers Noise control
« on: July 09, 2019, 09:18:05 AM »
Just thought I would throw this out there.
I had a card from one of my woodworking things... don't know, I saved the card, it could have come in an order or old mag (I don't get mags anymore).
Anyway it was KNC Home Shop and they offered noise and vibration control.
Well just looked them up, they are not KNC Home Shop.. they are
https://kineticsnoise.com/


And they offer home to full industrial applications.
Anyway, thought I would put this info out here if anyone needs it.
Seemed like a good piece of info.. and since they had the card, they appear to even sell to guys like us.
Jeff
Clausing 8520   SB Model 9a - power hacksaw, Milwaukee band saw in a table.  Delta Rockwell Surface Grinder (not online yet .. being rebuilt where am I going to stick this)
For pics: https://imgur.com/user/woodchucker/posts

4GSR

Re: Vibration Dampers Noise control
« Reply #1 on: July 09, 2019, 10:00:50 AM »
What did you say?  Can't hear over all of this loud noise and vibrations. ??? ;D

Thanks for sharing!
Ken

34_40

Re: Vibration Dampers Noise control
« Reply #2 on: July 09, 2019, 06:44:46 PM »
That site may prove helpful - thanks for the link.
My wife doesn't "appreciate" my guitar solos..   :P :) :'(
Clausing 108, Clausing 8520, Atlas Horizontal, Lincoln stick and mig welders

4GSR

Re: Vibration Dampers Noise control
« Reply #3 on: July 09, 2019, 07:21:54 PM »
Looking at some of the stuff offered, that stuff has to be expensive. 

Be nice to enclose my entire house in one of their enclosures! :o  For both noise and insulation.
Ken

Jake Parker

Re: Vibration Dampers Noise control
« Reply #4 on: July 09, 2019, 08:51:02 PM »
I need them to build a transparent wall that I can put behind the front seats of the mini-van. That way the kids can't annoy the crap out of me!

Carpenter84

Re: Vibration Dampers Noise control
« Reply #5 on: July 09, 2019, 09:10:08 PM »
Car of the future! "With seperate space dome for those annoying kids!"
Shawn

First 9x42 column mill,
Enterprise 10x28 lathe,
Ko Lee 6x12 surface grinder,
Airco dip/stick 160 welder,
Fully stocked wood shop.

Machinists Gazette

Re: Vibration Dampers Noise control
« Reply #5 on: July 09, 2019, 09:10:08 PM »