Author Topic: ACDC  (Read 2393 times)

Bill Gruby

Re: ACDC
« Reply #90 on: September 03, 2020, 12:43:21 PM »
 Just for you Charles, my good friend from down under.

  https://www.youtube.com/watch?v=KrLTe1_9zso

 "Billy G"
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

savarin

Re: ACDC
« Reply #91 on: September 03, 2020, 07:46:41 PM »
Cheers Bill,There has been a petition to make this our national anthem.
In my opinion something way better than our current one.
Who uses "girt" these days.

Bill Gruby

Re: ACDC
« Reply #92 on: October 09, 2020, 08:37:10 PM »
 Another Icon has passed, Eddie VanHalen Passed away on October 6, 2020.Rest in Peace Eddie.

 "Billy G"
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

PJB

Re: ACDC
« Reply #93 on: October 11, 2020, 11:30:19 PM »
I got my pencil. Gimme something to write on
1991 Bridgeport Series I 2J-VS  9"x48"
1979 Clausing Colchester Bantam Mk2 11"x30"
1972 Harig Super 612
2015 Tormach PCNC-1100 Mill

"I wants what you gots!"

grumpygator

Re: ACDC
« Reply #94 on: November 18, 2020, 11:27:37 PM »
How about some Temptations from the '60s. Just ahead of their time.
     https://www.youtube.com/watch?v=OHhhLlchtZ8&ab_channel=kate4ever1 :7505:
       **G**

Carpenter84

Re: ACDC
« Reply #95 on: November 18, 2020, 11:46:56 PM »
Hocus pocus by focus. Probably one of my all time favorite songs ever...
Shawn

First 9x42 column mill,
Enterprise 10x28 lathe,
Ko Lee 6x12 surface grinder,
Airco dip/stick 160 welder,
Fully stocked wood shop.

woodchucker

Re: ACDC
« Reply #96 on: November 19, 2020, 07:00:04 AM »
How about some Temptations from the '60s. Just ahead of their time.
     https://www.youtube.com/watch?v=OHhhLlchtZ8&ab_channel=kate4ever1 :7505:
       **G**



not ahead of their time, we are just repeating the same mistakes of history. we never seem to learn.

Jeff
Clausing 8520   SB Model 9a - power hacksaw, Milwaukee band saw in a table.  Delta Rockwell Surface Grinder
For pics: https://imgur.com/user/woodchucker/posts

Remember measure once cut twice, or was the measure twice cut once...

Bill Gruby

Re: ACDC
« Reply #97 on: November 19, 2020, 07:37:26 AM »
 You ask Shawn, we find for you.

 https://www.youtube.com/watch?v=RFDW9b_ejfI

 "Billy G"
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

Carpenter84

Re: ACDC
« Reply #98 on: November 19, 2020, 08:12:55 AM »
Interviewer: Thijs van Leer, what would you like to do when you grow up?

Thijs: I'd like to play flute and organ in a psychedelic progressive rock band..






Oh, and acid... Lots. Copious amounts, in fact.




That video never gets old. My dad had Focus on 8 track that we had set up in the living room when I was maybe 3 or 4 years old. He'd put that song on, we'd play it 5 or 6 times... Which is quite the feat being an 8 track and all... And dance around the living room like a pair of weirdos. Later in life I realise it was so fun for him because he was always full of vodka. Lol. Either way, classic rock never left me. Fairly certain the ribbon in that Focus cassette broke. He pulled all the tape out to show me how much was in it. Lol. The PILE on the floor.
Shawn

First 9x42 column mill,
Enterprise 10x28 lathe,
Ko Lee 6x12 surface grinder,
Airco dip/stick 160 welder,
Fully stocked wood shop.

savarin

Re: ACDC
« Reply #99 on: November 29, 2020, 06:31:26 AM »
still sounds good todayhttps://www.youtube.com/watch?v=rts7Qdew3HE