Author Topic: Hello all  (Read 185 times)

C.B.

Hello all
« on: July 12, 2020, 04:00:10 PM »
Hi I am a retired job shop machinist looking to share and learn on sites like this ....... :051bye:

Carpenter84

Re: Hello all
« Reply #1 on: July 12, 2020, 04:14:12 PM »
Hi C.B., welcome. Lots of great knowledge and people here. Many of us still absorbing everything that comes up.
It's been a bit slow here lately, but it's been weird times. Usually it can be pretty busy.
Shawn

First 9x42 column mill,
Enterprise 10x28 lathe,
Ko Lee 6x12 surface grinder,
Airco dip/stick 160 welder,
Fully stocked wood shop.

woodchucker

Re: Hello all
« Reply #2 on: July 12, 2020, 04:50:38 PM »
Hi C.B., welcome. Lots of great knowledge and people here. Many of us still absorbing everything that comes up.
It's been a bit slow here lately, but it's been weird times. Usually it can be pretty busy.


Hey welcome.  Your knowledge will be greatly appreciated. And we are a friendly bunch.



Jeff
Clausing 8520   SB Model 9a - power hacksaw, Milwaukee band saw in a table.  Delta Rockwell Surface Grinder (not online yet .. being rebuilt where am I going to stick this)
For pics: https://imgur.com/user/woodchucker/posts

C.B.

Re: Hello all
« Reply #3 on: July 12, 2020, 04:58:13 PM »
Thanks guys, been perusing this site and find that there are some of you who are on other sites that I am a member of as well so the fit here should be a good one................ :682:

chips and more

Re: Hello all
« Reply #4 on: July 12, 2020, 09:18:32 PM »
Hello C.B. and welcome. Find a comfy chair with some popcorn and let’s get started…Dave

RayH

Re: Hello all
« Reply #5 on: July 12, 2020, 09:29:11 PM »
Hello C.B.,

Do you have a home shop set-up all ready? Tell us about it?

Welcome aboard.

Jake Parker

Re: Hello all
« Reply #6 on: July 12, 2020, 10:33:22 PM »
Welcome aboard!

PJB

Re: Hello all
« Reply #7 on: July 13, 2020, 12:24:38 AM »
Welcome CB

Glad you found the MG
1991 Bridgeport Series I 2J-VS  9"x48"
1979 Clausing Colchester Bantam Mk2 11"x30"
1972 Harig Super 612
2015 Tormach PCNC-1100 Mill

"I wants what you gots!"