Author Topic: 456 AZ Gear Tooth Vernier  (Read 200 times)

Bill Gruby

456 AZ Gear Tooth Vernier
« on: August 25, 2020, 01:29:27 PM »
 Accepting offers on a Starrett 456 AZ Gear Tooth Vernier. These are expensive items, thats why I am not putting a price on it.All offers will be considered. I already have one and this one came into my posession this last week-end. Don't miss this if you have a use for one.
 It has the wooden case and all the paperwork needed to learn to use it.
 Take your time and think it out.

 PM me with offers. This offer includes all out of country offers.


  "Billy G"
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

4GSR

Re: 456 AZ Gear Tooth Vernier
« Reply #1 on: August 25, 2020, 02:14:33 PM »
Bill,

Can you post some pictures of the one for sale?

Thanks, Ken


Bill Gruby

Re: 456 AZ Gear Tooth Vernier
« Reply #2 on: August 25, 2020, 03:35:36 PM »
 I wish I could Ken, but this site won't let me. I will find a way.

 "Billy G"
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

Bill Gruby

Re: 456 AZ Gear Tooth Vernier
« Reply #3 on: August 25, 2020, 03:41:38 PM »
 The one I have for sale is exactly like this one, case and all, in the original box. Without the blemishes.

  https://www.ebay.com/itm/Starrett-456AZ-Gear-Tooth-Vernier-Caliper-inch/193450235606?hash=item2d0a8856d6:g:eTgAAOSwPe1UGecQ

 "Billy G"
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

4GSR

Re: 456 AZ Gear Tooth Vernier
« Reply #4 on: August 25, 2020, 05:15:21 PM »
Yeah, you have to reduce the jepg file size down to around 2 Mb or less to allow the picture to post.  I usually send the picture file to my email address and select "reduce file size to 30%"  Works perfectly every time.

Not to pee in your Post Toasties, here's a Chinesium one selling for $149.

https://www.ebay.com/itm/Digital-display-Gear-Tooth-Caliper-Gear-Tooth-Vernier-Caliper-Measuring/392283362559?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D225074%26meid%3D8a2ca0631eed4f9598b9b78a3ba8e539%26pid%3D100005%26rk%3D2%26rkt%3D12%26mehot%3Dco%26sd%3D254636753599%26itm%3D392283362559%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bDemotion%26brand%3DUnbranded&_trksid=p2047675.c100005.m1851

The Starrett one is the one to have, but this one too rich for my blood.  I'll send a PM if I decide to make an offer on it.  I'm a sucker for just about anything in Starrett tools. 

Ken

Jake Parker

Re: 456 AZ Gear Tooth Vernier
« Reply #5 on: August 25, 2020, 05:25:20 PM »
I use Tap a talk to post pictures.

If you email the pictures to me Bill, I will upload them for you.
I sent a PM with my email adress.

Bill Gruby

Re: 456 AZ Gear Tooth Vernier
« Reply #6 on: August 25, 2020, 05:26:44 PM »
 You didn't pee in anything. Those digitals are inaccurate and they will sometimes drift. Look up what a new 456 AZ goes for, fasten your seatbelt, LOL

 "Billy G"
« Last Edit: August 26, 2020, 07:10:07 AM by Bill Gruby »
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

4GSR

Re: 456 AZ Gear Tooth Vernier
« Reply #7 on: August 25, 2020, 05:44:23 PM »
Yeah, I've looked it up a while back.... Holy cow!!!! Way up north of a grand!!!

jpigg55

Re: 456 AZ Gear Tooth Vernier
« Reply #8 on: August 25, 2020, 06:26:57 PM »
I use Photoshop to reduce picture file size to post here.

I see what you mean about new cost. WOW !
SB 9A, Clausing 8520, Sanford MG 612

Bill Gruby

Re: 456 AZ Gear Tooth Vernier
« Reply #9 on: August 26, 2020, 08:02:00 AM »
 Ken is correct, they will easily top $1700.00 and head for 2 grand.

 "Billy G"
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

Bill Gruby

Re: 456 AZ Gear Tooth Vernier
« Reply #10 on: August 26, 2020, 02:40:14 PM »
  SOLD

  "Billy G"
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

Carpenter84

Re: 456 AZ Gear Tooth Vernier
« Reply #11 on: August 26, 2020, 02:49:34 PM »
Wow...

Care to share the details?
Shawn

First 9x42 column mill,
Enterprise 10x28 lathe,
Ko Lee 6x12 surface grinder,
Airco dip/stick 160 welder,
Fully stocked wood shop.

Bill Gruby

Re: 456 AZ Gear Tooth Vernier
« Reply #12 on: August 26, 2020, 02:57:39 PM »
 If the buyer wishes to come forward he will.

 "Billy G"
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.

Bill Gruby

Re: 456 AZ Gear Tooth Vernier
« Reply #13 on: August 27, 2020, 09:44:44 AM »
 It's on its way. Should arrive in 3 days. Tracking number sent in a PM. Sure hope the weather dosen't hold it up'

  "Billy G"
« Last Edit: August 27, 2020, 09:58:19 AM by Bill Gruby »
Don't sweat getting old, you'll still do dumb crap, just slower.

An Optimist will tell you the glass is half full, the pessimist half empty, the engineer will say the glass is twice as big as it needs to be.